Search Results

The author states that the objects of the paper are to define and trace the development of the various processes of carburetion, and to offer such suggestions along these lines as may assist the investigator in developing motorboats, automobiles and self-contained unit motor cars for railway purposes. The surface carburetor is mentioned chiefly as of historic interest. In considering the jet carbureter the author discusses the proportion of gas desired, the effect of the varying inertia of the air and the liquid gasoline and the breaking up of the combustible needed. Following sections review the devices for using kerosene, such as gasoline jet carbureters to which heat is applied, devices of the fixed gas type, the introduction of combustible directly into the cylinder, forcing combustible directly upon a hot surface in the cylinder and devices which raise the combustible to the boiling point.

The author states that the purpose of the paper is to outline that phase of metallurgical work pertaining to the connection between the laboratory and production in the automotive industry. Reasons are cited for selecting certain designs for parts to facilitate machining, complete or partial case-hardening, finishing and assembling. The next step is the choice of materials, a subject which is treated at some length. The author then takes up in turn the field for standardization in steel specifications, inspection of materials, physical testing of steels, uniformity of composition of metals, heat-treating operations, methods of carburizing, depths of case-hardening, treatment after carburization, errors in overspeeding hardening operations and drawing heat-treatment at low temperatures. Types of pyrometers, operations on hardened work, inspection for hardness and selection of hardening equipment are some of the other topics discussed.

The author considers the effects of velocity variation on the operation of a car and states that this variation is absorbed mainly by the flywheel. A formula is given for calculating the pressure on universal bearings. Various methods of protecting and lubricating joints are described. A number of European types of joints are illustrated. A much larger number of types of joints are used abroad in-asmuch as each maker usually makes his own design instead of purchasing it from a specialist as is the usual practice in this country. In conclusion the paper describes types of joints using flexible material, such as leather or spring steel.

The authors point out the need for more concrete data concerning the physical properties of bronze alloys and present an extensive chart covering the results of actual tests on a large range of cast bronze alloys. The influence of the method of making the test-specimen is discussed and it is hinted that new evidence concerning the proper interpreting of the true proportional limit is available. A very extensive set of microphotographs illustrates the variety of structures existing in the ordinary and in some unusual bronze alloys.

In this paper the author gives the results of an investigation of coarse crystallization. This investigation was carried out with commercial materials such as cold-drawn wire, hot and cold-rolled sheet, strip steel, cold-drawn tube and cold-pressings. The results of other investigations are briefly outlined. Coarse crystallization, or grain-growth, it is stated, is due to the action of a limited amount of strain, exceeding the elastic limit, followed by annealing within certain temperature ranges. The experimental work which led to this conclusion is explained in detail in the paper. The effect of forging, cold-drawing, cold-rolling and cold-pressing was determined with commercial materials. Some study was made of the effect of carbon on grain-growth and of the effect of coarse crystallization on the physical properties. In the discussion of commercial materials special reference is made to those used in motor car construction.